To be able to run Windows operating systems without issues, updating it to the most current version is highly recommended. However, when installing these updates is a challenge, then what?
We know it can be difficult; therefore, in the following guide we’ll discuss the best way to fix the issue that prevented us from completing the updates or reverse the modifications by your system.
Typically, after downloading the upgrades and restarting the PC Windows 10 users complain about freezing their screens and we were unable to complete the updates without changing the settings error message.
To fix this issue the issue, many users force to restart their system, only to get stuck in the loop of restarts. So, in order to solve this issue, we require specific solutions. This is what we’ll discuss in this article.
Table of Contents
Most common Windows update errors:
1. We couldn’t finish the update, thereby causing changes. will not turn off your computer This is because this happens when Windows updates fail to be installed.
2. We were unable to finish installing updates for Windows 10 is a condition that occurs when Windows is unable to complete installing updates
3. Inability to configure Windows updates to undo changes doesn’t disable your computer – this causes Windows to run in a loop since updates are not set up.
4. Windows 10 undoing changes stuck in the event that the installation of an update fails, the stop code error is triggered.
The reason behind various Windows updates is clear, Let’s continue and discover the best way to resolve Windows 10 undoing changes made to your computer.
How to fix Undoing Changes Made to Your Computer – Windows 10
There are many ways to address this issue Try them all at once and then see which one works for you.
1. Windows Booting Windows into Secure Mode
- Press and hold Shift + or F8 keys until the system is restarted.
- This will open this screen that includes several choices
- Choose Troubleshoot, Options and Advanced Options > Settings for Startup > Set up Safe Mode.
2. Delete Latest Updates
If you have put Windows in Safe Mode, you need to remove any updates that you have installed because they could cause issues. To do this follow these steps:
1. Type Control Panel into Windows lookup and then press the Enter key.
2. Click Programs/Programs & Features > View updates that have been installed.
3. This will open a brand new window that displays a listing that includes all Windows Updates. Choose the most recent to remove, then click on the Uninstall button.
4. Restart Windows 10 in normal mode.
There’s no reason to have issues if we were unable to complete the update error message.
3. Run DISM
DISM (Windows Deployment Images Servicing as well as Management) is an inbuilt Windows tool. It can help you resolve numerous Windows problems. Therefore, to undo modifications made to your computer , we’ll make use of it.
To execute the DISM command, you must follow this procedure:
1. Type Command Prompt into Windows search.
2. Select the search result and then click Run as Administrator from the left pane.
3. This is the command to enter: DISM.exe/Online Clearup-image/Restorehealth
4. If you encounter problems, try either an installation disc or USB. Once connected , type the below command in Command Prompt running as admin:
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
- Then, wait for the operation to be completed.
- Exit Command Prompt.
This can fix the I was unable to finish the Updates or Undoing the changes Error message on PC.
4. Perform the SFC scan
If you are dealing with Windows update errors, running sfcscannow can help. To utilize this command, follow the instructions in the following paragraphs:
- The Command Prompt is available to run as an administrator.
- Enter SFC/scannow in the search box and then press Enter key.
- Allow the process to finish. This will resolve any corrupted System files.
- Restart your system and see if the errors with the stop-code Windows 10 undoing changes is solved or not.
5. Use Windows Update Troubleshooter
Windows 10 offers a fantastic option to help you troubleshoot the majority of Windows errors. In Settings the Troubleshooter can help to fix problems.
To utilize it to use it, follow these steps:
1. Windows Settings Update and Security > Troubleshoot Windows Update > Use the troubleshooter.
2. Follow the instructions on screen and allow the procedure to complete.
3. Reboot your computer. This will fix the modifications made to your computer running Windows 10
6. Block Windows Automatic Updates
There is no way to stop Windows software updates since you’ll have to upgrade Windows in the near future or sooner.
So, instead of trying to stop Windows updates, we’ll employ a method to assist in blocking updates temporarily. To accomplish this you can follow the following steps:
1. Head to Windows Settings.
2. Search for Network & Internet and double click on it.
3. Select Status from the left pane. Change the properties of the connection in the left.
4. Find to find the Metered connection option, then toggle it to the left to turn on the Metered connection.
This will stop downloads of new updates for a short period because a limit on data is set.
After a few months, Microsoft releases updates that are bug-free turn off the update and download the most recent Windows update
7. Change the name of the folder Software Distribution
To save temporarily Windows installation files The Software Distribution folder is utilized. If a file becomes corrupted during installation it is possible that you could end up getting Windows 10 making changes again warnings about errors. So, in order to fix it you can try changing the name of the folder that is in question. To do that follow these steps:
1. Windows searches > Command Prompts > Run As Administrator
2. In this case, you must type in the command below. Make sure to hit Enter after every command.
net stop wuauserv
net stop bits
rename C:\Windows\SoftwareDistribution\ to SoftwareDistribution.bak
net start wuauserv
net start bits
3. Try updating Windows and you should not have any issue.
8. Allow the App Readiness service to be enabled.
In the list of methods above, this is the most up-to-date. To enable the App Readiness service to be enabled, follow these steps:
1. Use the Windows and R keys.
2. Here enter services.msc
3. Under Services , search for App Readiness Service > Right-click Start.
4. Restart your computer and see whether the error message from your PC is fixed or not.
It’s over for now. With any of the options mentioned above, you will be able to get rid of the annoying Windows 10 undoing changes made to your computer’s error messages.
