Do you need the codes for the RCA universal remote? Or are you unsure of the RCATV remote codes that operate your TV?
Are you looking for the RCA universal remote’s Vizio TV codes?
Do you already know your RCATV remote control codes or RCATV codes but require more instructions?
RCA remote control codes are intricate. To run RCATV successfully, you must be aware of the remote codes for RCA or RCA codes.
This guide includes a list of RCATV universal remote control codes as well as instructions on how to set up a TV or remote control with them.
Read on then.
RCA Corporation – A Full Introduction
RCA Corporation is a name in consumer electronics and was established in 1921. Before transitioning to the production of television receivers and other electronics, it first made phonographs and radios.
RCA produces and markets a variety of consumer electronics goods, including DVD players, A/V receivers, surround sound systems, vehicle radios, home theatre systems, and cable and satellite television receivers.
RCA TV Remote Codes and Programming Guide:
The device and configuration codes for RCATV are contained in the programming guide that is provided with the RCA universal remote. On a quick reference card included with a new universal remote, or online, you can get the programming guide and RCA TV remote code. This thorough manual also provides RCA remote control codes and setup instructions.
Codes for RCA Remote
The RCA Universal Remote has nine different remote codes for VCRs and eight different remote codes for RCA. There are two unique sets of codes for cable boxes.
RCA TV Remote Codes (Codes for RCATV)
044 038 034 027 019 011 006 000
RCATV Codes – Cable Box Codes
027 000
RCATV Codes – VCR Codes
069 054 037 035 028 008 007 005 000
RCATV Codes – RCA Universal Remote Codes for Vizio TV (Codes for RCATV)
0188 0187 0179 0125 0113 0096 0022 0015 0031 0054 0004 0107 0094 0100 0048 0102 0129 0342 0005 0191 0003 0163 0009 0162 0000
Brand Codes
| Syntax | 1610 1240 1331 |
| Sansui | 0463 0171 1670 1892 1935 |
| Panasonic | 1480 0250 1457 0051 1291 2264 |
| Gateway | 1755 |
| Dell | 1264 |
| Celebrity | 0001 |
| Funai | 0001 0171 1963 |
| LG | 1423 1447 0017 0178 2358 2424 |
| JBL | 0054 |
| Magnavox | 1454 1866 1755 0054 0051 0171 0802 1365 1856 1963 |
| JCB | 2372 |
| Hitachi | 1643 0145 |
| Nexus Electronics | 2183 |
| Philips | 1454 1866 0054 1744 1856 2372 2374 |
| RCA | 1547 1447 0000 0051 0093 1661 1781 2187 2247 2434 |
| Samsung | 0812 0060 0702 0178 1060 2051 |
| Techwood | 0051 |
| Viewsonic | 1755 0885 1330 1365 1578 1627 1640 1742 2014 2087 2277 |
| TVS | 463 |
| Soyo | 1826 |
| Pulsar | 0017 |
| Penney | 0000 0156 0051 0060 0178 |
| Apex Digital | 0748 0765 1217 2397 |
| GE | 1547 1447 0000 0051 0451 0178 |
| NetTV | 1755 |
| Prima | 761 |
| JVC | 0463 0053 1253 1601 1774 2264 |
| Insignia | 1423 1564 0463 0171 1660 1710 1892 1963 2049 |
| Hello Kitty | 0451 |
| Electrohome | 0463 1670 |
| JBL | 0054 |
| Sanyo | 017021039056057058 |
| Proton | 011027037072 |
| Bell & Howell | 005 |
| Radio Shack | 000021025036037059064 |
Furthermore, even if RCA produced your TV, that does not guarantee that the remote control RCATV codes given here will function with it. The numerous types of remote controls (with different programming capabilities and various RCA tv codes). Additionally, because TVs, DVD players, and other devices use different technologies, a universal remote control is not achievable.
RCAUniversal Remote Codes and Programming Guide
Your home entertainment system would benefit greatly from having an RCA universal remote control. It has the capacity to manage several components made by various manufacturers. Therefore, you won’t need to manage many remotes or worry about misplacing one. This remote can even be manually programmed if necessary. You can learn how these devices operate from this article and, if necessary, how to programme them.
RCA Universal Remote Code Programming (With 4-digit RCATV Codes)
Using the RCA code listed on the product box as a guide, enter the four-digit code unique to your system. This achieves two goals:
- First, since they may be exactly matched, you won’t have to guess which codes will operate your components.
- The RCA universal remote and your system can be directly matched second.
Checking The RCA Universal Remote’s Programming
Turn on a component contained in that code after entering the RCA universal remote’s system-specific codes. If you have a TV with this remote, for instance, turn it on. To check whether a component is turned on or off, press any button on the RCA universal remote control and look at the device. If the command from your RCA universal remote did not work as intended, look through your list of RCA remote codes for an alternative one. Look into which one would be more appropriate for your system.
How to Use the RCA Universal Remote
You can turn on and off or change channels once you’ve input the correct RCA universal remote control codes for your system. This remote can be placed in the middle of your living room and used as the control panel for all of your audio and video equipment. In order to prevent losing your audio/video remotes, you can also keep them all in a nearby drawer.
RCA Universal Remote Code Programming
Turn on a device connected to this kind of remote once the correct RCA remote codes have been entered into the RCA universal remote control for your system. Any button can be pressed to test the device’s responsiveness. If so, you must search your list of RCA remote control codes for an alternative code that is more appropriate for your system.
How to Program RCA Universal Remote Codes
Directly entering RCA TV codes is the ideal method for programming an RCA universal remote. This entails programming specific RCA remote codes directly into the remote control without consulting a manual. This is typically accomplished by following brand or numeric lists on the remote control for particular equipment, such as TVs, VCRs, DVRs, and audio equipment. There is another way to programme such gadgets.
The learning mode is just one of these alternate approaches. This gives you more versatile options for direct programming on your universal remote. For instance, if the remote has a learning feature, you can remove the remote control from your TV and start programming buttons that are particular to the features of your TV. You will need to try each of the RCA remote codes before you find one that works with your particular brand of television. If the RCA TV code is accurate, hit “stop” to preserve it for later use on the RCA universal remote.
Running Commands for Configuration on Your RCA Universal Remote
Executing configuration commands is simple once you’ve mastered how to programme your RCA universal remote with RCA TV codes. For instance, navigate to the settings and then programme if you want to remove all of the outdated codes from the RCA universal remote’s memory. All of the previous RCA remote codes that you had saved for other devices are displayed there. Each one can be deleted by pressing “select” until they are all gone.
On the other hand, there is a straightforward solution if your RCA universal remote control is not responding or not functioning properly with your device. Make sure your remote’s batteries are first fully charged and ready to go. In that case, it might be necessary to point your RCA universal remote directly at the appliance you need to operate rather than at an angle or from a distance.
If none of these fixes work to fix the issue with your RCA universal remote, you should probably contact customer care or the RCA universal remote’s maker. There are websites where you can enter precise RCA remote control codes for the brand of your particular item, and they will tell you which codes are most likely to work. By doing this, you can avoid spending time physically testing each one on your own.
Setting up an RCA universal remote Codes
- Verify that the batteries are rotating before using the remote. Make sure it functions properly.
- Before using the RCA Universal remote control, turn on any home theatre equipment components or devices you desire to set up, such as a television or a Blu-ray player.
- For a few seconds, press and hold the button on your computer that corresponds to the component you’re configuring. The process should begin with the on/off button lit and remain lit all the way through.
- To complete the process, press and hold the on/off button and the component button (TV, Blu-ray player, or DVD player) simultaneously for a long period of time. The illuminated on/off button will be simultaneously deactivated and activated. After then, it ought to restart turning itself back on to keep working.
- Release both of the keyboard buttons you are now holding down once the on/off button starts to glow once more. To maintain proper operation, make sure it is always turned on.
- To start the movie, hold down the play button on the remote control for a short period of time. After that, press the play button once every five seconds, continuing until the component you’re programming stops responding. After five seconds, if the component still isn’t off, push the play button again until it does.
- Press and hold the reverse key on your keyboard for a few seconds to finish this step. Following your confirmation that the component has been successfully reset, you should keep pushing it every few seconds until it has been.
- To save the programming in the remote’s memory after the device has been engaged, the stop button must be pressed and held for a short period of time.
- The same set of procedures you used for the prior devices will need to be used to every device you wish to programme.
- If the auto code search is ineffective for any reason, then the direct RCA remote codes input method may be able to resolve the problem.
FAQs
What stores sell RCA universal remote controls?
Both online and offline retailers carry RCA universal remote controls. Additionally, you may buy them straight from the RCA website. Additionally, it provides more details about their items.
How can I restart my RCA universal remote?
If you purchased your RCA universal remote from a third-party website, get help from that site to reset the device using its exclusive RCA remote codes. Use the RCA website’s “self-programming” method to reset the RCA universal remote if you bought it there. Start by taking out every battery from the gadget, and then replace each one within three minutes. Press and hold any button on your remote control for three seconds, then let go of all the other buttons while keeping that one pressed. Press and hold the power button and any other device buttons that correspond with a programmed component for three seconds or longer after waiting at least five seconds. You should be able to use the RCA universal remote normally after pressing the on/off button once, placing your batteries back in their original placements.
How can I upgrade my RCA universal remote?
The “self-programming” method described in this article can be used to update RCA universal remote controls via their website. For the latter approach, a USB drive must be loaded with an upgrade file that was downloaded from their website. The USB disc must then be plugged in once all the batteries in your remote have been removed. Last but not least, you can utilise the “self-programming” method described above. Keep in mind, however, that the same procedure must be followed for each item you want to programme into your universal remote control.
How many RCA universal remote control codes exist?
More than 1,000 RCATV universal remote codes are available. These RCATV numbers, however, also adhere to a pattern depending on the name of the associated equipment. Because of this, your RCA universal remote control should be able to access more than 100 RCATV universal remote codes provided the word “TV” is put into it. One of the applicable RCATV code possibilities will yield the required outcome after all others have been tried. Try entering the manufacturer-specific code(s) for your particular device if this doesn’t work.
Do I need to remove batteries when programming an RCA universal remote with RCATV codes?
To programme new devices, the batteries don’t need to be taken out. Only when you add or remove programmed components at any particular time should this be done. The only exception is if you’re using the self-programming method, in which case you’ll have to manually programme and reset the device.
What should I do if only the power button is functional but none of the other buttons are?
If the power button on your RCA universal remote does not turn off any connected devices, either the batteries need to be changed, or you are programming the RCA remote incorrectly. Replace the batteries first, if at all possible; if they appear to be brand-new, try programming in a different code (such as 0000) and attempting to turn off your component. Whether that doesn’t work, check to see if the device is programmed, then try a different code to see if your RCA universal remote control may be used anywhere else.
What kind of batteries should I use for my RCA universal remote control?
If you switched out all of the batteries for either AA or AAA ones, that would help. The best options are inexpensive alkaline or lithium batteries, though you can use other kinds if your RCA universal remote control isn’t working properly. Never use rechargeable batteries because they could harm your device.
Do I need to push a button for it to operate?
The “auto-repeat” function on RCA universal remote controls enables you to hold down a button without having to press it repeatedly. When employing macros, which are sets of commands that may be executed by hitting a number of buttons simultaneously or sequentially, this is especially helpful.
