Switching to a smart TV can be expensive if you have a standard TV. But fortunately, with the Roku device, users can now transform their standard TVs into smart TVs instantly and at a much more affordable rate.
Roku lets you stream video content on your television through an internet connection. Content of famous streaming platforms such as Netflix, Hulu, Prime Video, and others are available on Roku just the same way you watch them on your smart TV or smartphone. Live TV is also available on the Roku device. While the majority of the content is pre-recorded, services such as Netflix allow a large amount of video to be seen just one day after its first release.
The “Roku box” serves as the simplest method to stream content to your TV screen. Roku is a little square gadget for your television that allows you to stream movies and TV shows through apps or channels. Roku debuted on the market in 2008, and ever since its release, its content has broadened a lot. But just like any other device, the Roku Box may also sometimes undergo wear and tear and show errors in its functioning. In such cases, you must be aware of the fixes to the many common problems that you can perform itself at home.
The most common problem faced by Roku users is related to the Roku remote. We have covered all possible fixes that you can below –
StepWise FIX- Roku Remote Not Working
1. Check the batteries of your Roku remote
It can sometimes happen that your Roku remote is not functioning correctly because the battery of the remote is low. In such cases, you should check the battery of your Roku remote. Some Roku remotes use AA batteries, while some use AAA ones. Replace the batteries with the new ones and check if the remote is working fine now. If not, go through the other fixes given below.
2. Unpair and re-pair the Roku remote
Another common problem that usually occurs with the Roku remote not functioning correctly is that it can get unpaired without you knowing it. System upgrades, low power supply, switching Wi-Fi networks, pairing with another Roku device, or a simple technical issue might all hypothetically cause an unexpected unpairing.
Fortunately, pairing your Roku remote with your Roku device is very easy. Follow the instructions given below
- Unplug the Roku box from the power supply and wait for at least 10 seconds.
- Replug the box and switch on the device. Wai for the home screen to load.
- Hold the pairing button on the Roku remote for five seconds or more until the remote starts blinking. Once the remote starts blinking, it will search for the Roku device and pair it with it. Make sure that other Roku boxes are switched off.
If your remote uses an IR pointer and not Wi-Fi, you will have to ensure that the remote’s receiver end and the TV are clean and no dirt is causing any obstructions.
3. Resetting your Roku remote
Resetting an electronic device can solve most of the problems a device might face. The same thing can be applied to your Roku remote as well. Follow the below steps to reset your Roku remote:
- Take out the batteries from the Roku remote.
- Stop the power supply to the Roku box.
- Wait for at least 10 seconds and then switch on the power supply to the Roku box.
- Wait for the home screen to load, then re-insert the batteries into the Roku remote.
4. Check the HDMI connections
The company mentioned on Roku’s official website that the Roku remotes could be interrupted by HDMI connections on the TVs. The issue is more common on Roku streaming sticks as they are directly inserted into the HDMI port of a TV.
One solution is to switch to an HDMI cable extender, which will allow users to position their Roku stick away from the TV’s HDMI port. Hence, the HDMI port will not be able to obstruct the remote’s connection.
5. Check your internet connection
If you have not yet found success in resolving your faulty Roku remote, then you can try checking your Wi-Fi connection because a weak or flawed Wi-Fi connection can cause errors in the functioning of the Roku remote.
You do not need an internet connection to connect your Roku remote to your TV, but you do need a local working network. If your local network is unavailable for whatever reason, your remote will not operate until the connection is restored back again.
If you have sufficient technical expertise, it may be worthwhile to investigate the router’s settings; something may have occurred that is causing the Wi-Fi to not operate properly.
6. Switch to Roku remote mobile app
Not very ideal, but a temporary solution to your Roku remote problems is using a Roku remote app. This is the ultimate answer to how to connect Roku to Wi-Fi without a remote. This app can be downloaded from AppStore or Playstore for free. It might be a temporary fix, but it is reliable.
Before using the Roku remote app, you must ensure that your Roku device and your phone are connected to the same Wi-Fi.
Wait for the Roku TV remote app to load. Once the home screen loads, you will be able to connect to your Roku box and use the app as your Roku remote.
7. Troubleshoot the Roku App
There are two probable reasons why the Roku remote app is unable to see your Roku box:
Wi-Fi: Check that your Roku box’s network connectivity has not been disabled. To verify, navigate to Settings > System > Advanced System Settings > Control By Mobile Apps > Network Access. You must pick either the Default or the Permissive option.
VPN: Keep in mind that the Roku remote app will not function if either your phone or your Roku box is connected to a VPN.
8. Get a new Roku remote
On Amazon, replacing any of the remotes costs no more than a few dollars.
You should just ensure that the remote you are going to buy is compatible with your Roku box or streaming stick before you make a purchase.
Conclusion
We hope the suggestions in this article helped you get your Roku remote operating again. You do not need to constantly look for multiple remotes because your Roku remote can handle a variety of devices, including your soundbar. That is why fixing your Roku remote is essential for your entertainment.
