Roku devices turn any TV into a smart TV, offering access to an extensive library of movies and TV shows. However, a malfunctioning remote can hinder the streaming experience. Here’s a comprehensive guide on how to pair or reset different types of Roku remotes.
How to Pair a Simple Roku Remote
Step by Step Instructions:
- Ensure that the simple Roku remote has a direct line of sight to the Roku receiver.
- If the remote stops working, double-check for any obstructions blocking its path, such as a glass cabinet door.
- To verify if the infrared light in the remote is functioning, point it at the camera on your smartphone and push any buttons. If the camera fails to detect the infrared light, the remote may need replacement or an upgrade to a newer Roku device.
- If needed, take out the batteries from the remote and put them back in. As an alternative, you can swap out the batteries for fresh ones.
- To reset the Roku device, locate and press the reset button, typically found on the back or bottom of the device.
Troubleshooting Tips:
If the remote remains unresponsive, consider using a different remote or upgrading to a newer Roku device.
How to Pair a Roku Voice Remote
Using the Pairing Button
- If the Roku voice remote is unresponsive, locate the pairing button in the battery compartment or on the back of the remote.
- Keep the pairing button pressed until the status light starts flashing green.
- Move the remote close to the Roku device to pair it. For optimal results, ensure the remote is in close proximity to the device during pairing.
- If the remote uses replaceable batteries, insert fresh batteries and attempt pairing again.
- If using a Roku Streaming Stick and encountering issues, obtain a free HDMI extender cable at My.Roku.com/HDMI.
Pairing from the Roku Device
- Ensure that the rechargeable voice remote is fully charged, or insert fresh batteries if using a remote with replaceable batteries.
- Unplug the Roku device from power and remove the remote’s batteries.
- Plug the Roku device back in and wait for the Roku logo to appear on the screen before reinserting the batteries.
- Press the pairing button on the remote to initiate pairing once the Roku device is powered up.
How to Reset an Unresponsive Roku Remote?
- Unplug the Roku player from power and remove the batteries from the remote.
- Wait for 5 seconds, then plug the Roku player back in.
- Once the Roku logo appears on the screen, reinsert the batteries in the remote.
- Press and hold the pairing button on the remote for approximately 5 seconds or until the pairing light starts flashing.
- Wait for the Roku device to complete the pairing process, typically within 30 seconds or less. A prompt will appear on the TV to indicate a successful pairing.
If you wish to pair a new Roku remote while an existing remote is operational, navigate to Settings > Remotes & devices > Remotes > Set up a new device on the Roku home screen. Then, follow the on-screen instructions to pair the new remote.
Remember to ensure that any replacement remote is compatible with your specific Roku device before purchasing.
For further assistance, HelloTech offers professional technicians to set up Roku devices and address home theater queries.
