Blink cameras are wireless devices that offer home security and peace of mind. They are easy to set up and use, but sometimes they may encounter some issues. One of the common problems that Blink camera users face is the flashing red light on the camera. This can indicate different things depending on the model and situation of the camera. In this article, we will explain what causes the Blink camera to flash red and how to fix it.
Possible causes of Blink camera flashing red
A blinking red light on a Blink camera can mean one of the following:
- The camera is not connected to the internet. This can happen due to a network outage, a weak Wi-Fi signal, or a change in the router settings.
- The camera is detecting motion. This is normal when the camera is recording a video clip or live view. The red light should stop after the motion has ceased.
- The camera has low battery. This can happen when the batteries are drained or have failed. The camera will flash red 5 or 6 times after the blue recording light goes out.
- The camera is in setup mode. This can happen when the camera is new or has been reset. The camera will flash red 3 or 4 times to indicate that it is ready to be added to a system.
Troubleshooting steps to fix Blink camera flashing red
Depending on the cause of the blinking red light, there are different steps you can take to fix it. Here are some general tips to try:
- Check your internet connection. Make sure your router is working properly and your Wi-Fi signal is strong enough for the camera. You can use the app to check the signal strength and move the camera closer to the router if needed.
- Reset your camera and sync module. Sometimes, a simple reset can resolve the connection issue. You can use a thin object to press the reset button on the back of the camera and wait for the LED pattern to change. You can also unplug and plug in your sync module and wait for it to reconnect.
- Replace your batteries. If your camera flashes red 5 or 6 times, it means that your batteries are low or have failed. You should replace them with fresh AA lithium non-rechargeable batteries as soon as possible.
Step-by-step guide to replace batteries in Blink camera
To replace the batteries in your Blink camera, follow these steps:
- Remove the back cover of the camera by sliding it down.
- Remove the old batteries and dispose of them properly.
- Insert two new AA lithium non-rechargeable batteries into the battery compartment, making sure to align the polarity correctly.
- Replace the back cover of the camera by sliding it up until it clicks into place.
- Wait for a few seconds for the camera to power on and reconnect.
How to reset your Blink camera to resolve the flashing red light issue
To reset your Blink camera, follow these steps:
- Locate the reset button on the back of the camera. It is a small hole near the serial number QR code.
- Use a thin object (such as a paper clip) to press and hold the reset button for about 10 seconds.
- Release the reset button and wait for the LED pattern to change.
- If you see a solid green and blinking blue light, it means that your camera is ready to be added to a system.
- If you see a solid red light, it means that your camera needs a software update. Contact support for assistance.
Contacting Blink support for further assistance
If none of the above steps work and your Blink camera still flashes red, you may need to contact Blink support for further assistance. You can reach them by phone, email or chat through their website: https://support.blinkforhome.com/
Tips to prevent Blink camera from flashing red in the future
Maintain Blink camera functionality and avoid red flashes by adopting these practices:
- Ensure batteries remain in a fresh state, changing them as required.
- Position your router centrally for a robust, uninterrupted Wi-Fi signal, steering clear of device interference.
- Stay current with firmware enhancements by frequently seeking updates via the app.
- Preserve camera hygiene and dryness, using a soft cloth to remove dust or moisture.
Conclusion
Blink cameras serve well in bolstering home security, yet occasional red flashes can occur for diverse reasons. The article below gives insight into the root of the problem and presents straightforward solutions. Blink support stands ready to assist with any inquiries or further help required.
